文章分类

当前位置:首页>光模块>光模块>10GBASE-SR | 300m | I-Temp | XFP光模块 FTLX8512D3BTL

10GBASE-SR | 300m | I-Temp | XFP光模块 FTLX8512D3BTL

发布时间:2016-11-08 点击数:423
封装: XFP
Finisar's FTLX8512D3BTL 10Gb/s XFP transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077i, revision 4.5. They comply with 10-Gigabit Ethernet 10GBASE-SR/SW per IEEE 802.3ae, 10G Fibre Channel 1200-Mx-SN-I, and can support OTN/FEC protocols OTU1e and OTU2e over an Industrial Temperature range of -40oC to +85oC.Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA.The transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.


主要特性:
Supports 8.5Gb/s to 11.32Gb/s bit rates
Hot-pluggable XFP footprint
Power dissipation <1.5W
RoHS-6 compliant (lead-free)
Temperature range -40°C to 85°C
Single power supply:3.3V
Maximum link length of 300m (OM3)
Uncooled 850nm VCSEL laser
Duplex LC connector
Built-in digital diagnostic functions

应用:
10GBASE-SR/SW 10G Ethernet
1200-Mx-SN-I 10G Fibre Channel
10GBASE-SR/SW 10G Ethernet OTN/FEC (OTU1e and OTU2e)
800-Mx-SN-I 8G Fibre Channel
10G CPRI

Specifications:
距离:300 m
数据速率(最大):11.3 Gb/s
协议:符合 8x光纤通道标准 符合 10x光纤通道标准 10 兼容千兆以太网
Low End Case Temperature (°C):-40
High End Case Temperature (°C):85
Diagnostics:Digital
Transmitter:VCSEL
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:850 nm 波段
在线客服
  • 销售热线
    027-81318600