文章分类

当前位置:首页>光模块>光模块>10Gb/s 单纤双向 10km SFP+光模块 FTLX2071D3xx

10Gb/s 单纤双向 10km SFP+光模块 FTLX2071D3xx

发布时间:2016-11-08 点击数:240
封装: SFP+
Finisar’s FTLX2071D327/FTLX2071D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber.This capability doubles the capacity of installed legacy single mode fiber links.They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

The FTLX2071D327/FTLX2071D333 is a “limiting module”, i.e., it employs a limiting receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module.The optical transceiver is compliant per Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

主要特性:
Hot-pluggable SFP+ footprint
Bidirectional 10G over single strand single mode fiber
Supports 9.95 to 10.5 Gb/s bit rates
Power dissipation <1W
RoHS-6 compliant (lead-free)
Industrial temperature range -40°C to 85°C
Single 3.3V power supply
Maximum link length of 10km
Uncooled DFB
Receiver limiting electrical interface
Single LC connector
Built-in digital diagnostic functions

应用:
10GBASE-LR/LW 10G Ethernet
1200-SM-LL-L 10G Fibre Channel
2.457 Gb/s CPRI
3.072 Gb/s CPRI/LTE
4.915 Gb/s CPRI/LTE
6.144 Gb/s CPRI/OBSAI/LTE
9.8304 Gb/s CPRI/LTE

Specifications:
距离:10 km
数据速率(最大):10.5 Gb/s
协议:符合 10x光纤通道标准 10 兼容千兆以太网 兼容无线 CPRI
Low End Case Temperature (°C):-40
High End Case Temperature (°C):85
Diagnostics:Digital
Transmitter:DFB Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:BiDi 1271/1331nm
在线客服
  • 销售热线
    027-81318600