文章分类

当前位置:首页>光模块>光模块>10G 40km 1310nm SFP+光模块 FTLX1772M3BCL

10G 40km 1310nm SFP+光模块 FTLX1772M3BCL

发布时间:2016-11-08 点击数:360
封装: SFP+
Finisar's FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with SFF-8431 and SFF-8432, and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x Fibre Channel and 6.144G/9.83 CPRI.  These transceivers have higher optical transmit power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1 transceivers. They support an optical link budget of 17dB to compensate for the higher fiber attenuation loss at 1310nm over 40km of G.652 single mode fiber.

Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. These modules utilize internal transmitter and receiver re-timer IC's for SONET/SDH jitter compliance and to enhance host cards' signal integrity. The transceivers are Pb-free and RoHS-6.

主要特性:
Hot-pluggable SFP+ footprint
17dB optical link budget for up to 40km over G.652 single mode fiber
Supports 6.144, 8.5G and from 9.83 to 11.3 Gb/s bit rates
Uncooled 1310nm DFB laser
Power dissipation <1.5W
-5°C to 75°C temperature range
RoHS-6 compliant (lead-free)
Single 3.3V power supply
Uncooled 1310nm DFB laser
Duplex LC connector
Built-in digital diagnostic functions
应用:
6.144G/9.83G CPRI
8.5Gb/s Fibre Channel
10G NRZ SONET, SDH
10G Ethernet and Fibre Channel
G.709 OTN FEC bit rates

Specifications:
距离:40 km
数据速率(最大):11.3 Gb/s
协议:兼容 8x 光纤通道 兼容 SONET OC-192 兼容 10x 光纤通道 兼容 10 千兆位以太网
Low End Case Temperature (°C):-5
High End Case Temperature (°C):75
Diagnostics:Digital
Transmitter:DFB Laser
Receiver:APD
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段
在线客服
  • 销售热线
    027-81318600