文章分类

当前位置:首页>光模块>光模块>10GBASE-ER/OC-192 IR-2 多速率 | 40km | SFP+光模块 FTLX1672M3BTL

10GBASE-ER/OC-192 IR-2 多速率 | 40km | SFP+光模块 FTLX1672M3BTL

发布时间:2016-11-08 点击数:296
封装: SFP+
Finisar's FTLX1672M3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDM STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BTL transceivers use internal clock and data recovery (CDR)  IC's for the transmitter and receiver.This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Finisar's FTLX1672M3BTL transceivers are RoHS compliant.

主要特性:
Hot-pluggable SFP+ footprint
Supports 8.5 and 9.95 to 11.3 Gb/s
40km link length (800ps/nm)
Internal transmitter/receiver CDR
Low power consumption
Cooled 1550nm EML laser
Limiting electrical interface receiver
Duplex LC connector
Built-in digital diagnostic functions
RoHS-6 compliant (lead-free)
Case temperature range:-40°C to 85°C

应用:
SONET OC-192 IR-2/-3
SDH STM-64.2b/3b
OTN G959.1 P1S1-2D2b
OTN G.709 OTU1e/2/2e FEC bit rates
10GBASE-ER/EW
8.5/10G Fibre Channel

Specifications:
距离:40 km
数据速率(最大):11.3 Gb/s
协议:符合 8x光纤通道标准 符合 SONET OC-192 符合 10x光纤通道标准 10 兼容千兆以太网 兼容无线 CPRI
Low End Case Temperature (°C):-40
High End Case Temperature (°C):85
Diagnostics:Digital
Transmitter:EML
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:1550nm
在线客服
  • 销售热线
    027-81318600