文章分类

当前位置:首页>光模块>光模块>10GBASE-LR/OC-192 SR-1多速率 | 10km | SFP+光模块 FTLX1472M3BxL

10GBASE-LR/OC-192 SR-1多速率 | 10km | SFP+光模块 FTLX1472M3BxL

发布时间:2016-11-08 点击数:408
封装:
SFP+
Finisar's FTLX1472M3BxL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to 10km over G.652 single mode fiber.
These transceivers are equipped with internal transmitter and receiver retimers (Clocks and Data Recover or CDR) to comply to SONET/SDH jitter requirements and to enhance host cards high speed data-signal integrity.
They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km).
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Thes optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

主要特性:
Hot-pluggable SFP+ footprint
Up to 10km link length
6.14, 8.5 and 9.83 through 11.3Gb/s bit rates
< 1.5W power dissipation, <1.0W with CDR's OFF
Pb-free/RoHS compliant
Single 3.3V power supply
Uncooled 1310nm DFB laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
FTLX1472M3BCL:Commercial temperature range -5°C to 75°C

FTLX1472M3BNL:Extended temperature range -5°C to 85°C

FTLX1472M3BTL:Extended temperature range -40°C to 85°C
应用:
10G NRZ SONET VSR2000-2R1, SDH I-64.1, OTN P1I1-2D1
10G Ethernet 10GBASE-LR/-LW
G.709 OTU 1e/2/2e FEC bit rates
8.5G and 10G Fibre Channel
6.144 and 9.83Gb/s CPRI


Specifications:
距离:10 km
数据速率(最大):11.3 Gb/s
协议:符合 8x光纤通道标准 符合 SONET OC-192 符合 10x光纤通道标准 10 兼容千兆以太网
Low End Case Temperature (°C):-5
High End Case Temperature (°C):85
Diagnostics:Digital
Transmitter:DFB Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段












































在线客服
  • 销售热线
    027-81318600