文章分类

当前位置:首页>光模块>光模块>10G/1G 双速率 (10GBASE-LR 和 1000BASE-LX) 10km SFP+光模块 FTLX1471D3BCV

10G/1G 双速率 (10GBASE-LR 和 1000BASE-LX) 10km SFP+光模块 FTLX1471D3BCV

发布时间:2016-11-08 点击数:336
封装: SFP+
Finisar's FTLX1471D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over singlemode fiber.They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-LR/LW and 1000BASE-LX.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports.The FTLX1471D3BCV is a "limiting module", i.e., it employs a limiting receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the hostboard EDC PHY with a limiting receiver SFP+ module.The transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.

主要特性:
Hot-pluggable SFP+ footprint
Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Single 3.3V power supply
Maximum link length of 10km
Uncooled 1310nm DFB laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Commercial temperature range:-5°C to 70°C
应用:
1000BASE-LX 1G Ethernet
10GBASE-LR/LW 10G Ethernet
Specifications:
距离:10 km
数据速率(最大):10.3 Gb/s
协议:兼容千兆光纤以太网 10 兼容千兆以太网 兼容无线 CPRI
Low End Case Temperature (°C):-5
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:DFB Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段
在线客服
  • 销售热线
    027-81318600