文章分类

当前位置:首页>光模块>光模块>10GBASE-LRM 220m SFP+光模块 FTLX1371D3BCL

10GBASE-LRM 220m SFP+光模块 FTLX1371D3BCL

发布时间:2016-11-08 点击数:385
封装: SFP+
Finisar's FTLX1371D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber.They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.The FTLX1371D3BCL is a "linear module" i.e. it employs a linear receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module.The transceiver is RoHS compliant and lead-free per Directive 2011/65/EU, and Finisar Application Note AN-2038.


主要特性:
Hot-pluggable SFP+ footprint
Supports 10.3Gb/s 10GBASE-LRM bit rate
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Single 3.3V power supply
Maximum link length of up to 220m
Uncooled directly modulated Fabry-Perot (FP) laser at 1310 nm
Receiver linear electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Commercial temperature range:-5°C to 70°C


应用:
10GBASE-LRM 10G Ethernet
Legacy FDDI multimode links


Specifications:
距离:220 m
数据速率(最大):10.3 Gb/s
协议:10 兼容千兆以太网
Low End Case Temperature (°C):-5
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:Fabry-Perot Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段
在线客服
  • 销售热线
    027-81318600