文章分类

当前位置:首页>光模块>光模块>10G/1G 双速率(10GBASE-SR 和 1000BASE-SX)400m 多模数据通信 SFP+光模块 FTLX8574D3BCV

10G/1G 双速率(10GBASE-SR 和 1000BASE-SX)400m 多模数据通信 SFP+光模块 FTLX8574D3BCV

发布时间:2016-11-08 点击数:409
封装: SFP+
Finisar's FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber.They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.The FTLX8574D3BCV is a "limiting module", i.e., it employs a limiting receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module.This product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports.The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.


主要特性:
Hot-pluggable SFP+ footprint
Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Single 3.3Vpower supply
Maximum link length of 400m on OM4 MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Commercial temperature range:-5°C to 70°C

应用:
1000BASE-SX 1G Ethernet
10GBASE-SR/SW 10G Ethernet


Specifications:
距离:400 m
数据速率(最大):10.3 Gb/s
协议:兼容千兆光纤以太网 10 兼容千兆以太网 兼容无线 CPRI
Low End Case Temperature (°C):0
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:VCSEL
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:850 nm 波段
在线客服
  • 销售热线
    027-81318600