文章分类

当前位置:首页>光模块>光模块>100GBASE-SR10 / OTN 多速率 100m CFP光模块 FTLC8281xCNM

100GBASE-SR10 / OTN 多速率 100m CFP光模块 FTLC8281xCNM

发布时间:2016-11-08 点击数:510
封装: CFP
Finisar’s FTLC8281RCNM and FTLC8281SCNM 100GE CFP transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber.They are compliant with the CFP MSA as defined in this document and with IEEE 802.3ba 100GBASE-SR10 including 10x 11.2G OTN applications.Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and Finisar Application Note AN-2106.The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.




主要特性:
Hot-pluggable CFP form factor
Supports 103.1Gb/s (FTLC8281RCNM) or dual-rate including 112 Gb/s (FTLC8281SCNM) aggregate bit rates
Power dissipation < 12W
RoHS-6 compliant
Commercial case temperature range of 0°C to 70°C
Single 3.3V power supply
Maximum link length of 100m on OM3 Multimode Fiber (MMF) and 150m on OM4 MMF
Uncooled 10x10Gb/s 850nm transmitter
CAUI electrical interface
Single MPO24/MTP24 receptacle
MDIO management interface



应用:
100GBASE-SR10 100G Ethernet
10x11.2Gb/s Multimode OTN (FTLC8281SCNM only)



Specifications:
距离:100 m
数据速率(最大):112 Gb/s
协议:符合 100G 以太网
Low End Case Temperature (°C):0
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:VCSEL
Receiver:PIN
Voltage Supply:3.3
Connector:MPO (MTP24)
波长:850 nm 波段
在线客服
  • 销售热线
    027-81318600