文章分类

当前位置:首页>光模块>光模块>40GBASE-ER4 / OTU3 多速率 | 40km QSFP+光模块 FTL4E1QM1C

40GBASE-ER4 / OTU3 多速率 | 40km QSFP+光模块 FTL4E1QM1C

发布时间:2016-11-09 点击数:547
封装: QSFP+
Finisar’s FTL4E1QM1C QSFP+ transceiver modules are designed for use in 40 Gigabit Ethernet links and 4x10G OTN client interfaces over single mode fiber.They are compliant with the QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4 and OTU3 requirements specified in ITU-T Recommendation G.695 as adapted to a 40km interface.Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.The transceiver is RoHS compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.


主要特性:
Hot-pluggable QSFP+ form factor
Supports 39.8 Gb/s to 44.6 Gb/s aggregate bit rates
Power dissipation < 3.5W
18.5 dB link insertion loss budget
RoHS-6 compliant
Commercial case temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 40km on Single Mode Fiber (SMF)
Uncooled 4x10Gb/s CWDM transmitter
XLPPI electrical interface
Duplex LC receptacles
Built-in digital diagnostic functions, including Tx/Rx power monitoring

应用:
40GBASE-ER4 40G Ethernet
OTU3, OTU3e1, OTU3e2

Specifications:
距离:40 km
数据速率(最大):44.6 Gb/s
协议:兼容 OTN OTU3 符合 40G 以太网
Low End Case Temperature (°C):0
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:4x DFB Laser
Receiver:APD
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段
在线客服
  • 销售热线
    027-81318600