文章分类

当前位置:首页>光模块>光模块>40GBASE-LR4 | 2km lite | QSFP+光模块 FTL4C1QL1C

40GBASE-LR4 | 2km lite | QSFP+光模块 FTL4C1QL1C

发布时间:2016-11-09 点击数:546
封装: QSFP+
Finisar’s FTL4C1QL1C QSFP+ optical transceiver modules are designed for use in 40 Gigabit Ethernet links over single mode fiber.They are compliant with the QSFP+ MSA and are compatible with IEEE 802.3ba 40GBASE-LR4 up to 2 km.Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.The transceiver is RoHS compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

主要特性:
Hot-pluggable QSFP+ form factor
Supports 41.2 Gb/s aggregate bit rates
Power dissipation < 3.5W
RoHS-6 compliant
Single 3.3V power supply
Maximum link length of 2km on Single Mode Fiber (SMF)
Uncooled 4x10Gb/s CWDM transmitter
XLPPI electrical interface
Duplex LC receptacles
Built-in digital diagnostic functions, including Tx/Rx power monitoring
Commercial case temperature range:0°C to 70°C


应用:
40GBASE-LR4 Lite 40G Ethernet


Specifications:
距离:2 km
数据速率(最大):41.2 Gb/s
协议:兼容 10 千兆位以太网 兼容 40G 以太网 兼容 IB QDR
Low End Case Temperature (°C):0
High End Case Temperature (°C):70
Diagnostics:Digital
Transmitter:4x DFB Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
波长:1310nm 波段
在线客服
  • 销售热线
    027-81318600